DECATHLON-
Item code:BH26.
INSTRUCTION MANUAL
26
3.
Using the hardware provided, mount
the main landing gear to the fuselage.
1. The blind nuts are already mounted in-
side the fuselage.
2. The holes in the landing gear should be
to accept the mounting bolts.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
Landing gear.
Secure
INSTALLING THE MAIN LANDING GEAR.
MOUNTING THE TAIL WHEEL
BRACKET.
Mark point
3x12mm.
