MODULAR GRILLGUARD FOR DODGE RAM MEGA CAB 1500/2500/3500 06-08
INSTALLATION INSTRUCTION
3
rd
STAGE
Step One: Locate hardware. Check contents with the hardware listed below.
QTY
DESCRIPTION
8
M6-1.00 x 25mm button head bolts, stainless steel
4
M6-1.00 acorn nuts, stainless steel
12
M6 flat washers, stainless steel
4
rubber gaskets
Step Two: Securing wire insert to brush guards. Locate the following item’s listed below.
QTY
DESCRIPTION
2
wire guard insert, left & right side
Attach one rubber gasket to each end of the wire guard. Peel the paper backing off the
rubber gasket. Place the gasket on the end of the bracket and press firmly till the gasket is
secured in place.
Position the wire insert on the driver's side of the vehicle. Align the two holes in the
bracket with the two holes in the brush guard as shown in illustration below. Using the
hardware listed in step one, secure the wire insert to the brush guard. Be sure to fasten
both ends before fully tightening hardware. Repeat this procedure on the opposite side of
the vehicle. Be sure to use all hardware supplied and tighten all bolts.
Page 5 of 5