
ARMOUR FRONT BUMPER
2011-16 FORD SUPERDUTY F250-350
Page 5 of 5
Driver Side Installation Pictured
(Fig 12) Slide the Driver side Support
Bracket to the inside of the Bumper
Complete
Installation
(2) 12mm Hex Bolts
(4) 12mm Flat Washers
(2) 12mm Lock Washers
(2) 12mm Hex Nuts
(Fig 13) Driver side Support Bracket
attached to Frame and Bumper
Reuse factory double
bolt plate and factory
hex nuts
WARNING!
Do not crawl under bumper
unless the bumper is properly supported on
blocks or stands or the bumper may fall.
(Fig 11) Driver side Support
Bracket with factory hardware
Factory double
bolt plate
Factory hex
nuts
Front
(2) 12mm Hex Bolts
(4) 12mm Flat Washers
(2) 12mm Lock Washers
(2) 12mm Hex Nuts
Front