ARMOUR FRONT BUMPER
2011-16 FORD SUPERDUTY F250-350
Page 1 of 5
PARTS LIST:
1
ARMOUR Front Bumper Assembly
2
8-1.25mm x 25mm Hex Bolts
1
Driver/left side Support Bracket
2
8-1.25mm x 16mm Hex Bolts
1
Passenger/right side Support Bracket
6
8mm x 24mm x 2mm Flat Washers
1
Driver/left side Light Bar
“L” Bracket
4
8mm Lock Washers
1
Passenger/right side Light Bar
“L” Bracket
2
8mm Hex Nuts
1
License Plate Bracket
2
6mm x 20mm Button Head Bolts
2
License Plate Plastic Plugs
4
6mm x 18mm x 1.6mm Flat Washers
4
12-1.75mm x 35mm Hex Bolts
2
6mm Nylon Lock Nuts
8
12mm x 24mm x 2.5mm Flat Washers
1
4mm Wrench
4
12mm Lock Washers
10 200mm Nylon Cable Ties
4
12-1.75mm Hex Nuts
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. BUMPER IS HEAVY, ASSISTANCE IS HIGHLY
RECOMMENDED TO AVOID POSSIBLE INJURY OR DAMAGE TO THE VEHICLE.
1.
Remove the license plate and bracket. On models with factory fog lights, unplug both lights. Release
the wiring harness from the clips attached to the back of the bumper,
(Figures 1 & 2)
. Move harness
away from bumper.
2.
Release the rubber air deflector from the back of the bumper. Next, remove the bumper supports
attached to the bumper frame bracket and outer ends of the bumper,
(Figure 2)
.
3.
Place blocks or jack stands under the front bumper to support it during mounting bolt removal. Once the
bumper has been safely supported, remove the (4) factory bumper bolts,
(Figure 3)
.
WARNING!
Assistance is required to hold the bumper in place during bolt removal to prevent the
bumper from falling. Carefully slide the bumper off over the tow hooks.
4.
Remove the (4) factory hex nuts, lower frame extension and the (2) double bolt plates from the end of
the frame,
(Figures 1, 4 & 5)
. Repeat this Step to remove the passenger side lower frame extension.
(2) License
Plate Plugs
Driver/left side
Support Bracket
Passenger/right side
Support Bracket
Passenger side Light
Bar “L” Bracket
License Plate
Bracket
Driver side Light
Bar “L” Bracket