TAIL LIGHT GUARD FOR 06-ON HONDA RIDGELINE
Fig 1
Fig 3A
To remove taillight
assembly, unscrew
the two hex bolts,
firmly grasp taillight
assembly and pull
evenly, straight back
from vehicle. Do not
pry assembly from
vehicle or damage
may result.
Installation Complete
Fig 2
The alignment pins
on the taillight
assembly push into
these two bushings.
Line up the pins on the
assembly with the
sockets and gently
push the taillight
assembly into position.
Line up the mounting
tabs on the Taillight
Guard and secure with
the factory hex bolts
and reattach the Guard
to the Support Bracket
Fasten the Support
Bracket to the Taillight
Guard with the supplied
4-.70mm x 15mm
Phillips Head Screw
4mm Flat Washer
4mm Lock Washer
Fig 3B
Fig 4
Mark this location. Secure
the Support Bracket to the
vehicle with
(1) ST4*19mm Self Tapping
Screw
(1) 4mm Flat Washer