RENEGADE -
ITEM CODE:BH66
Instruction Manual
12
Pushrod wire
3 x 20mm
Secure
Pushrod wire
COWLING.
1. Slide the fiberglass cowl over the en-
gine and line up the back edge of the cowl with
the marks you made on the fuselage.
Right side
Trim and cut
Bottom side
2. While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the engine. The
front of the cowl should be positioned so the
crankshaft is in
nearly
the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
3.
Slide the cowl back over the engine
and secure it in place using four wood screws.
See picture below.
