Black Horse Model PC-9 ARF BH79, Instruction Manual Book

Page: 24 / 37

24
PC-9
-
Item code: BH79.
Instruction Manual.

5) When you are sure that everything is a
aligned correctly, mix up a generous amount
of 30 minute epoxy. Apply a thin layer to the
slot in the mounting platform and to the verti-
cal stabilizer mounting area. Apply epoxy to
the lower rudder hinge. Set the stabilizer in
place and re-align. Double check all of your
measurements once more before the epoxy
cures. Remove any excess epoxy using a
paper towel and rubbing alcohol and hold the
stabilizer in place with T-pins or masking tape.
Allow the epoxy to fully cure before proceed-
ing.
Remove covering
Epoxy glue
Epoxy glue
C/A glue
C/A glue
Top side
Remove covering