30
MUSTANG P51 -
Item code: BH33
.
Instruction Manual
Install adjustable servo connector in the
servo arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to the
bottom nut. This will prevent the connector from
loosening during flight.
PUSHROD THROTTLE SERVO
INSTALLATION.
Throttle servo
Throttle pushrod
Secure
Cut
1) Cut out the switch hole using a modeling
knife. Use a 2mm drill bit and drill out the two
mounting holes through the fuselage side.
2) Secure the switch in place using the
two machine screws provided with the radio
system.
INSTALLING THE SWITCH.
Remove covering
