HOME RUN.
INSTRUCTION MANUAL
5
1) Using a ruler & pen to draw a straight
line as below picture.
INSTALLING THE AILERON CONTROL HORN
2MM x 20MM
2) Locate nylon control horns, nylon con-
trol horn backplates and 2 machine screws.
Straitgh line.
Servo arm.
3) Position the aileron horn on the bottom
side of aileron. The clevis attachment holes
should be positioned over the hinge line as
shown below.
4) Using a 1mm drill bit and the control
horns as a guide, drill the mounting holes
through the aileron halves.
5
)
Mount the control horns by inserting the
screws through the control horn bases and
aileron halves, then into the mounting
backplates.
Do not overtighten the screws or the
backplates may crush the wood.
6) Thread one clevis control horn onto each
aileron torque rod. Thread the clevis on until
they are flush with the ends of the torque rods.
Control Horn
Mounting Screws
Mounting Plate
Aileron torque rod.
Clevis.
