Black Horse Model BH181, Instruction Manual Book

Page: 6 / 54

Turbine Jet Engine with thrust 8kg
Viper Jet TURBINE Item code: BH181 Instruction Manual
PARTS LISTING (NOT INCLUDED).
6
Wire cutters.
Hex Wrench.
Threadlocker
(screw cement).
Hand or
electric drill.
cm
1 2 3 4 5 6 7 8 9 10
Straight edge ruler.
Some more tools.
Assorted drill bits.
Masking tape.
Paper towels.
Rubbing alcohol
90° square or builder's triangle.
Screw driver
Medium C/A glue
EPOXY A
EPOXY B
30 minute epoxy.
5 minute epoxy.
Modeling knife.
2 bender plier
TOOLS & SUPPLIES NEEDED
Cut off excess.
B
Apply epoxy glue.
Apply threadlocker
(screw cement).
C . A
Apply instant glue
(C.A glue, super glue).
Cut off shaded portion
carefully.
Assemble left and right
sides the same way.
Must be purchased
separately!
Ensure smooth, non-binding
movement when assembling.
Warning!
Set all scerws securely. If they come off during
flight you will lose control of your aircraft!
Pay close attention here.
Drill holes using the stated.
(in this case 1.5mm ).
1.5mm
Take particular care here.
The number of times
the same way Assembly
(in this case twice).
2
Symbols used throughout this instruction manual, comprise:
Servos size: (35x15)mm.
Torque: 6V(4.6kg-cm), 7.4V(8kg-cm).... 8pcs
Servo extension leads.
................. pcs. 2
220mm ...... 9 pcs.
420mm ...... 4 pcs.
330mm ...... 2 pcs.
920mm ...... 3 pcs.
6
BATTERY
LiPo: 2S- 7.4V - 3,200mAh...................2 Packs
LiPo: 2S- 4V - 2,200mAh...................2 Packs
Ø20x1600mm
600 Deg High Temperature Braided Soft Chemical Fiber Tubing
- - - 1