Black Horse Model BH181, Instruction Manual Book

Page: 47 / 54

Viper Jet TURBINE Item code: BH181 Instruction Manual
1. Completely charge your transmitter and receiver
batteries before your first day of flying.
2. Check every bolt and every glue joint in your
plane to ensure that everything is tight and well
bonded.
3. Double check the balance of the airplane
4. Check the control surface
5. Check the receiver antenna . It should be fully
extended and not coiled up inside the fuselage.
6. Properly balance the propeller.
1. We highly recommend setting up a plane using
the control throws listed.
2. The control throws should be measured at the
widest point of each control surface.
3. Check to be sure the control surfaces move in
the correct directions.
Ailerons : 14 mm up 14 mm down
Elevator : 14 mm up 14 mm down
Rudder : 16 mm right 16 mm left
Flap : Mid: 20mm down
Ailerons : 16 mm up 16 mm down
Elevator : 16 mm up 16 mm down
Rudder : 18 mm right 18 mm left
Flap : Landing: 30mm down
HIGH RATE
LOW RATE
CONTROL THROWS
FLIGHT PREPARATION PRE FLIGHT CHECK
Aileron Control
14mm
14mm
Rudder Control
16mm
16mm
Elevator Control
14mm
14mm
47
Flap Control
20mm
30mm