MXS Item code: BH167
INSTALLING THE ENGINE.
* Locate the long piece of wire used for the
throttle pushrod. One end of the wire has been
pre-bend in to a "Z" bend at the factory. This "Z"
bend should be inserted into the throttle arm of
the engine when the engine is fitted onto the
engine mount. Fit the engine to the engine mount
using the screws provided.
4x30mm
4mm Washer
- - - - - - - 4
4mm Spring Washer
- - - - - - - 8
4x30mm Cap Screw
- - 8
- - -
4
mm Nut
- - 8
Engine
mount
500mm Pushrod wire
- - - 1
Connector
- - - 1
125mm
Pushrod wire
4x30mm
Secure
Secure
12