Black Horse Model BH150, Instruction Manual Book

Page: 2 / 21

To avoid scratching your new airplane, do not
unwrap the pieces until they are needed for assembly.
Cover your workbench with an old towel or brown paper,
both to protect the aircraft and to protect the table. Keep
a couple of jars or bowls handy to hold the small parts
after you open the bag.
SUGGESTION
Please trial fit all the parts. Make sure you have the
correct parts and that they fit and are aligned properly
before gluing! This will assure proper assembly.
is This kit
hand made from natural materials, every plane is unique
NOTE
Return only the component part that is defective in
materials or workmanship. Please pack the unit carefully
and insure it, as this warranty does not cover loss or
damage in transit.
Black Horse Model guarantees the component
parts in this kit to be free from defects in both material
and workmanship at the date of purchase by the
purchaser.
This warranty does not cover cosmetic damage or
damage due to acts of God, accident, misuse, abuse,
negligence, commercial use, or modification of or to any
part of the Product.
This warranty does not cover damage due to
improper installation, operation, maintenance, or
attempted repair by anyone other than Black Horse
Model.
WARRANTY
DISCLAIMER
In that Black Horse Model has no control over the
final assembly or material used for final assembly, black
Horse Model is not responsible for loss of use, or other
incidental or consequential damages.
Read this disclaimer carefully before using this
product. Please strictly follow the instruction manual to
assemble and use this.
Furthermore, Black Horse Model cannot be held
liable for personal injury or property damage caused by
the use or misuse of Black Horse Model products. By the
act of using the user-assembled products, the user
accepts all resulting liability.
This instruction manual is designed to help you build a great flying aeroplane. Please read this manual thoroughly
before starting assembly. Use the parts listing below to identify all parts.
WARNING
If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C supplier and join your
local R/C Model Flying Club. R/C Model Flying Clubs offer a variety of training procedures designed to help the new pilot
on his way to successful R/C flight. They will also be able to advise on any insurance and safety regulations that may
apply.
Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is capable of
causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU ASSUME ALL RISK &
RESPONSIBILITY.
and minor adjustments may have to be made. However,
you should find the fit superior and assembly simple.
The painted and plastic parts used in this kit are fuel
proof. However, they are not tolerant of many harsh
chemicals including the following: paint thinner, C/A glue
accelerator, C/A glue debonder and acetone. Do not let
these chemicals come in contact with the colors on the
covering and the plastic parts.
Creases: Blow warm air over the area and rub down
with a soft cloth.
knowing what you are doing you could easily injure
yourself or somebody else. Please keep your safety and
well-being in mind at all times.
Note regarding the film covering
When self-tapping screws have to be screwed
into wood, apply a little white glue to prevent them
shaking loose: just squirt white glue into the hole
and fit the screw
Wing wrap: Hold the panel twisted gently in the
opposite direction to the wrap, and apply warm air to
remove the creases from the covering.
Minor creases or bubbles may develop in the film
covering due to major fluctuations in weather conditions
(temperature, humidity etc.); in rare cases you may even
find a slight warp in a component. These minor faults are
in the nature of film-covered built-up wooden structures,
and can easily be corrected using a heat gun, as
commonly used for modelling.
Even if you have built a large number of RC
modelsplease read right through these instructions and
check all the kit components against the parts list. We
have taken great trouble to keep construction as simple
as possible, without making any compromises in the area
of safety.
Important:
Before you start construction
If you are a beginner to this type of powered model,
please ask an experienced model flyer for help and
support. If you attempt to operate the model without
Caution! do not heat the film more than is absolutely
necessary. If the air or the iron is too hot, the film may melt
and holes may be formed.
This model is highly pre-fabricated and can be built
in a very short time. However, the work which you have to
carry out is important and must be done carefully. The
model will only be strong and fly well if you complete your
tasks competently - so please work slowly and
accurately.
Caution: This model is not a toy!
3
SUPER DECATHLON Item code: BH150 Instruction Manual