SPITFIRE MK
Item code: BH149.
Instruction Manual
13
Push in
1. RUDDER CONTROL HORN INSTALLATION
Rudder control horn install as same as method of
elevator control horn.
2. Push in
1. A+B Epoxy glue
Control horn
2. RUDDER PUSHROD INSTALLATION
Rudder pushrod install as same as the way of elevator
pushrod. Please see pictures below.
Rudder pushrod
Rudder
control horn
M2 Lock nut
M2
Snap keeper
Flaslink
Pushrod wire
Servo arm
Rudder pushrod
Rudder servo
2. A+B
Epoxy glue
1. Push in
XI. MOUNTING THE TAIL WHEEL
BRACKET
1)
Set the tail wheel assembly in place on the ply-
wood plate. The pivot point of the tail wheel wire should
be even with the rudder hinge line and the tail wheel
bracket should be centered on the plywood plate.
3 x 12mm
2)
Mark the locations of the two mounting screws.
Remove the tail wheel bracket and drill 2mm pilot holes
at the locations marked.
Mark
