PZL-140 WILGA
Item code: BH124
Instruction Manual
21
INSTALLING THE FUSELAGE SERVOS
1) Install the rubber grommets and brass collets into the elevator,
rudder and throottle servor. Test fit the servos into the servo tray.
Trim the tray if necessary to fit your servos.
2) Mount the servo to the tray using the mounting screws provided
with your radio system.
o
90
o
90
approx.16mm
2mm
2mm
2mm
For Throttle Servo
For Rudder, Elevator Servo
1
2
3
4
Top view
Cut off shaded portion
carefully.
Drill holes using the stated.
(in this case 2mm ).
2mm
