PIPER CUB.
INSTRUCTION MANUAL
15
When cutting through the covering to
remove it, cut with only enough pressure
to only cut through the covering it’s self.
Cutting into the balsa structure may
weaken it. This could lead to possible
failure during flight.
2. Draw a center line onto the horizontal
stabilizer. Then slide the horizontal into the
fuselage.
3. Mark the shape of the vertical on the left
and right sides onto the horizontal stabilizer
using a felt-tip pen
4. Remove the stabilizer. Using the lines
you just drew as a guide, carefully remove the
covering from between them using a modeling
knife.
ELEVATOR INSTALLATION.
Center line.
Elevator servo.
C/A glue
1. Using a modeling knife, cut away the
covering from the fuselage for the stabilizer
and remove it.
C/A glue
Remove covering.
C/A glue
Pen.
