B.A Eagle
Item code: BH158
Instruction Manual
17
1) Install the rubber grommets and brass collets into
the elevator, rudder and throttle servos. Test fit the
servos into the servo tray. Trim the tray if necessary to
fit your servos.
2) Mount the servo to the tray using the mounting
screws provided with your radio system.
o
90
approx.16mm
2mm
4
2mm
2mm
For r
udder servo
INSTALLING THE FUSELAGE SERVOS
Cut off shaded portion
carefully.
<Fuselage top view>
Must be purchased
separately!
The number of times
the same way Assembly
(in this case twice).
2
Drill holes using the stated.
(in this case 1.5mm ).
1.5mm
Rudder Servo
Throttle Servo
Rudder Servo
