ARROW 3D
INSTRUCTION MANUAL.
7
2) While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the motor. The
front of the cowl should be positioned so the
crankshaft is in
nearly
the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
3)
Slide the cowl back over the motor.
Machine
screw.
3 x 10mm
1) Install the rubber grommets and brass
eyelets onto the aileron servo.
2) Install the metal connector onto servo
arm .
SERVO INSTALLATION.
Remove covering
Right side of the fuselage
4) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out,
remove the masking tape and the servo lead
from the thread.
3) Using a modeling knife, remove the
covering at servo tray.
Remove covering
Left side of the fuselage
