5
WESTLAND WYVERN
- Item code:BH105
INSTRUCTION MANUAL.
1) Install the rubber grommets and brass
eyelets onto the aileron servos.
1.INSTALLING THE AILERON SERVOS.
2) Using a modeling knife, remove the cov-
ering at possition show below.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
Remove covering
Servo tray.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Top side
Bottom side
Aileron.
secure.
I. AILERON.
Summary of Contents for WESTLAND WYVERN BH105
Page 9: ...9 WESTLAND WYVERN Item code BH105 INSTRUCTION MANUAL Secure 3x15mm 5x45mm spring...
Page 10: ...10 WESTLAND WYVERN Item code BH105 INSTRUCTION MANUAL Secure 3x10mm 3x8mm...
Page 14: ...14 WESTLAND WYVERN Item code BH105 INSTRUCTION MANUAL E p o x y glue Secure Secure C A glue...
Page 29: ...29 WESTLAND WYVERN Item code BH105 INSTRUCTION MANUAL ITEM CODE BH 105...
