16
WESTLAND WYVERN
- Item code:BH105
INSTRUCTION MANUAL.
1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
INSTALLING THE THROTTLE - CABLE.
FUEL TANK.
INSTALLING THE STOPPER ASSEMBLY
1) The stopper has been pre-assembled
at the factory.
2) Using a modeling knife, cut one length
of silicon fuel line (the length of silicon fuel line
is calculated by how the weighted clunk should
rest about 8mm away from the rear of the tank
and move freely inside the tank). Connect one
Throttle cable.
Throttle cable.
Throttle servo.
Throttle servo.
Summary of Contents for WESTLAND WYVERN BH105
Page 9: ...9 WESTLAND WYVERN Item code BH105 INSTRUCTION MANUAL Secure 3x15mm 5x45mm spring...
Page 10: ...10 WESTLAND WYVERN Item code BH105 INSTRUCTION MANUAL Secure 3x10mm 3x8mm...
Page 14: ...14 WESTLAND WYVERN Item code BH105 INSTRUCTION MANUAL E p o x y glue Secure Secure C A glue...
Page 29: ...29 WESTLAND WYVERN Item code BH105 INSTRUCTION MANUAL ITEM CODE BH 105...
