SUKHOI 31.
Instruction Manual
24
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
MOUNTING THE TAIL WHEEL
BRACKET.
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
3. Secure the tail wheel bracket in place
using three 3mm x 12mm wood screws. Be
careful not to overtighten the screws.
Rudder pushrod.
Elevator pushrod.
WING ATTACHMENT.
See picture wing attach to fuselage.
Installing the fuselage hatch as same as pic-
ture below.
Mark point.
Wing bolt.
