PC-9 Item code: BH151
.
Instruction Manual
16
Push in
Push in
Secure
XVI. INSTALLING COCKPIT
FUSELAGE
See picture below:
Pillot
A/B Epoxy glue.
Use glue to secure the canopy to the fuselage. The
shape of the canopy, so make sure to install it in the
correct direction.
2. Push in
1. A/B Epoxy glue.
C/A glue.
C/A glue.
Top side.
Close and
Open
Position the canopy so the rear frame on the canopy is
aligned with the rear edge of the cockpit opening. Use
canopy glue to secure the canopy to the canopy hatch.
Use low-tack tape to hold the canopy in position until
the glue fully cures. Wrap the tape completely around
the canopy hatch, as the tape does not stick well to
the covering. We used balsa sticks to hold the lower
edges of the canopy tightly against the canopy hatch.
