7
YAK 55 -
ITEM CODE:BH111.
Instruction Manual
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
INSTALLING THE THROTTLE PUSHROD.
Secure
Throttle servo
Throttle servo
Secure
Throttle pushrod
C u t
Engine mount
ply of wood .
3 x 12mm.
Secure.
Pushrod wire.
