English
13
Fig. K
3
2
Fig. L
7
Installing and Removing the Battery Pack
WARNING:
Make certain the lock-off switch is
engaged to prevent switch actuation before removing
or installing battery.
nOTE:
For best results, make sure your battery pack is
fully charged.
To install battery pack:
Insert battery pack
20
into battery
housing
22
as shown in FIG. M until fully seated and an
audible click is heard.
Make sure battery pack is fully seated and fully latched into
position.
To remove battery pack:
Depress the battery release
button
21
on the battery and pull battery pack out of
appliance.
Fig. M
20
21
22
OPERATION
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below
may result in electric shock, fire and/or serious
personal injury.
• Guard Against Kickback which can result in severe
injury or death. See Important Safety Instructions
guard Against Kickback
, to avoid the risk
of kickback.
• Do not overreach. Do not cut above chest height.
Make sure your footing is firm. Keep feet apart.
Divide your weight evenly on both feet.
• Use a firm grip with your left hand on the bail
handle
3
and your right hand on the main
handle
2
so that your body is to the left of the
guide bar.
• Do not hold chain saw by kickback guard
11
.
Keep elbow of left arm locked so that left arm is
straight to withstand a kickback.
WARNING:
Never use a cross-handed grip (left
hand on the rear handle and right hand on the
front handle).
WARNING:
Never allow any part of your body to be
in line with the guide bar
13
when operating the
chain saw.
• Never operate while in a tree, in any awkward
position or on a ladder or other unstable surface.
You may lose control of saw causing severe injury.
• Keep the chain saw running at full speed the entire
time you are cutting.
• Allow the chain to cut for you. Exert only light
pressure. Do not put pressure on chain saw at
end of cut.
WARNING: When not in use always have the
battery removed.
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories.
An
accidental start-up can cause injury.
WARNING:
Shock hazard.
Under no circumstances
should this product be used near water.
WARNING: Burn hazard.
Moving parts within the
base unit become hot during use. Avoid contact with
moving parts within base unit when removing and
installing accessories.
WARNING:
Always use proper eye protection that
conforms to ANSI Z87.1 (CAN/CSA Z94.3) while
operating this appliance.
CAUTION:
Wear a filter mask if the operation
is
dusty.
Use of gloves, long pants and substantial
footwear is recommended. Keep long hair and loose
clothing away from openings and moving parts.
