Black + Decker BEHT200, Instruction Manual

Page: 10 / 32

English
8
TROUBLESHOOTING
Problem Possible Cause Possible Solution
Slow running, noisy or hot
blades. • Dry, corroded blades. • Lubricate blades.
• Blades or blade support bent. • Straighten blade or blade support.
• Bent or damaged teeth. • Straighten teeth.
• Loose blade bolts. • Tighten blade bolts.
Unit will not start. • Lock off not fully operated. • Check that lock off is fully forward prior to
moving main trigger.
• Cord not plugged in. • Plug cord into a working outlet.
• Circuit fuse is blown. • Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
• Circuit breaker is tripped. • Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to trip,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
• Cord or switch is damaged. • Have cord or switch replaced at
BLACK+DECKER Service Center or
Authorized Servicer.
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.