Black+Decker VM2040, Manual

Page: 6 / 9

6
corresponds to the voltage on the rating
plate. Power plugs must match the outlet.
Never modify the plug in any way.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service Centre
in order to avoid a hazard.
Features
Thi s Appliance includes some or all of the
following features.
1. On/off switch
2. Cord rewind button
3. Speed control selector
4. Handle
5. Hose
6. Airflow control switch
7. Extension tube
8. Suction head
9. Dust container
10. Wheels
11. Bin full indicator
In addition, this appliance is supplied
with some or all of the following
accessories (fig. A)
12.
Crevice tool / Brush tool
13. Upholstery brush
Assembly
Connecting the hose (fig. B)
• Insert th e hose connector (15) into the inlet
(16) of the appliance.
• Push the hose until the release buttons
(17) click into place.
• To disconnect the hose, press the release
buttons and pull out the hose.
Connecting the tube (fig. C)
• Push the hose nozzle (18) into the tube (7).
• To remove the tube, pull the hose out of the
tube.
Mounting the suction head (fig. D)
The suction head (8) allows for vacuuming
on carpet and hard surfaces
(e.g. laminate and tiles).
ENGLISH
• Push the tube (7) into the head (8).
• To remove the head, pull the tube out of
the head.
Mounting accessories (fig. D)
The crevice tool (12) allows for vacuuming
in narrow and hard-to-reach places.
The brush tool (12) allows for vacuuming on
furniture, blinds, curtains, windows and stairs.
The upholstery brush (13) allows for vacuuming
furniture. The accessories can be mounted on
both the hose (5) and the tube (7).
• Push the accessory onto the hose nozzle (18) or
the tube (7).
• To remove an accessory, pull the accessory
from the hose nozzle or the tube.
Selecting the crevice tool or brush tool (fig. E)
• To use the crevice tool, move the brush part
(19) against the direction of the arrow.
• To use the brush tool, move the brush part (19)
in the direction of the arrow.
Use
Unwinding and rewinding the power cord
The cord rewind button (2) can be operated by
hand or foot.
• Pull a sufficient length of cord from the back of
the appliance.
• After use, press the cord rewind button to
retract the cord into the unit. Manually guide
the cord to ensure it does not swing back.
Ensure the plug is correctly located.
Adjusting the tube length (fig. F)
The ex
tension tube (7) can be adjusted as follows:
• Push the knob (20) and slide the tube to the
desired length.
• Release the knob.
Adjusting the suction head (fig. D)
• For vacuuming on carpets, switch the brush
actuator (21) into the up position.
• For vacuuming on laminates, tiles, etc., switch
the brush actuator into the down position.