10
11
Baccus Worldwide LLC is confident of the quality of
its products and offers an outstanding warranty. This
warranty statement is in addition to and in no way
prejudices your statutory rights under the Australian &
New Zealand Consumer Law.
If a Baccus Worldwide LLC product becomes
defective due to faulty materials, workmanship or
lack of conformity, within 24 months from the date
of purchase, Baccus Worldwide LLC guarantees to
replace defective parts, repair products subjected to
fair wear and tear or replace such products to make
sure of the minimum inconvenience to the customer
unless:
• The product has been used for trade, professional or
hire purposes;
• The product has been subjected to misuse or
neglect;
• The product has sustained damage through foreign
objects, substances or accidents;
• Repairs have been attempted by persons other than
Baccus Worldwide LLC service staff.
To claim on this warranty, you will need to submit
proof of purchase and return the allegedly defective
product to Baccus Worldwide LLC’s local market
distributor, at your expense.
Please visit our website www.baccusworldwide.com
to register your new Baccus Worldwide LLC product
and to be kept up to date on new products and special
offers. Further information on the Baccus Worldwide
LLC brand and our range of products is available at
www.baccusworldwide.com.
Distributed by:
Directed Electronics
Address:
44 Translink Drive, Keilor Park Victoria Australia 3042
PH:
+ 61 03 8331 4800
Email:
Baccus Worldwide LLC
Weena 290, 3012 NJ Rotterdam or
Postbus 819, 3000 AV Rotterdam
+31(0)10 282 16 11
Problem
Solution
12V DC
accessory
outlet will
not power
appliance
• Make sure the the appliance does
not draw more than 5 amps.
• Check that unit has a full charge.
Recharge unit if necessary.
If the unit does not charge or operate after following
the above directions, contact the manufacturer.
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning!
Before performing any maintenance or
cleaning of the tool, unplug the unit from the power
supply.
• From time to time wipe the appliance with a damp
cloth. Do not use any abrasive or solvent-based
cleaner. Do not immerse the appliance in water.
• Clean the outside case of the battery charger with a
soft cloth and, if necessary, mild soap solution.
• Do not allow liquid to enter the battery charger. Do
not operate when the battery charger is wet.
• Keep the battery charger cords loosely coiled during
storage to prevent damage to the cords.
Replacing the fuse in the 12V DC
charging adapter (optional accessory)
1. Remove the cap by turning it counterclockwise.
2. Remove the centre pin and the spring.
3. Remove the fuse.
4. Install a new fuse of the same type and size (8A).
5. Replace the centre pin and spring.
6. Secure the cap by turning it clockwise onto the
plug.
Do not overtighten.
7. Test for proper operation of the 12V DC charging
adapter.
PROTECTING THE ENVIRONMENT
Correct disposal of this product
This marking indicates that this product
should not be disposed with other
household waste throughout the EU. To
prevent possible harm to the environment
or human health from uncontrolled
waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return
your used device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmentally safe recycling.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a
new product.
Lead acid batteries can be recharged many times. At
the end of their useful life, discard batteries with due
care for our environment:
• Do not dispose of the battery in fire, as this may
result in an explosion.
• Lead acid (Pb) batteries are recyclable. They
must not be disposed of with household waste.
The battery must be removed and disposed of in
accordance with local regulations.
• Do not short-circuit the battery terminals.
• Be aware that the battery is heavy.
• If possible, operate the appliance to run the battery
down completely.
• Place the battery in a suitable packaging to ensure
that the terminals cannot be short-circuited.
TECHNICAL DATA
Boost ampere
12V DC, 500A
instantaneous
Battery type
Maintenance-free, sealed
lead acid, 12V DC, 19Ah
Area Light
1 long-life white LED
USB socket
5V DC, 2A
Dc accessory socket
12V DC, 5A
Maximum AC output
230-240V ac, 50Hz,
200W continuous
Output waveform
Modified sine wave
Compressor
Pressure
(max.) bar/p.s.i 8.27/120
Mains charging adapter
Input:
100-240V AC, 50/60Hz
Output:
14,5V DC, 750mA
12V DC charging adapter
(optional accessory)
12V DC
WARRANTY
Our goods come with guarantees that cannot be
excluded under the Australian & New Zealand
Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation
for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of
acceptable quality and the failure does not
amount to a major failure.
VG11AU_Manual_091216.indd 10-11
9/12/2016 12:01:19 PM
