Black+Decker SMART PRO BL6020, Use And Care Manual

Page: 6 / 24

6
7
TOUCHSCREEN
MANUAL CONTROLS
Power When blender is first plugged in, the blue power symbol is all that
shows. When it is touched, the other graphics light up (except for and ).
If the blender sits without controls touched for 30 seconds, the screen dims.
To “wake up” the blender touch any of the white words or symbols. If the
power button is pressed while the screen is dim, the rest of the graphics will
turn off.
PULSO (Pulse) Press PULSO once and it starts flashing. While PULSO is flash-
ing, press it again and the blender will pulse. PULSO always uses the fastest
speed.
Note:
Use PULSO for no more than five seconds at a time, allowing the
blender to rest briefly between each pulse, no more than two minutes
total. This helps break up ice and distribute the ingredients.
Speed slider with – and + Use your finger on the slider to select the exact
speed you want. Using – makes the slider go all the way to the lowest speed.
Using + makes the slider go all the way to the highest speed.
Start When using the speed slider, the will flash. Press it to start the
blender.
Stop Press to stop the blender.
SMART FUNCTIONS
With combinations of blending, pulsing, and pausing, the “smart” auto func-
tions make it easy to prepare your favorite blender recipes.
Press the function of your choice and then the . The blender will sense for 3
seconds and then blend based on the smart function The program will
complete and the blender will turn itself off. If you wish to interrupt the
program, press . The slider acts as a countdown timer during the prepro-
grammed functions.