27
TROUBLESHOOTING
Overheat protection system:
This juicer contains a PTC overheat
protection system. When the appliance is being operated for too long
or with too much load, the PTC protector will shut down the power of
the appliance to protect the unit. If the power shuts down, unplug for 15
minutes and plug back in for normal operation.
Problem
Possible cause
Solution
Appliance will
not start when
speed dial is
turned on
The juicer may not be
assembled correctly.
Turn the juicer off and
unplug. Make sure everything
is properly attached and
parts are clean and free of
food remnants.
The motor of
the appliance
seems to be
struggling
Pulp container may
be full.
Turn the appliance off and
empty the pulp container.
Remember, the pulp container
holds about 2L of pulp, do not
allow to get too full.
Pulp may have
collected under the
cover.
Turn off and unplug. Remove the
lid and wash thoroughly. Return
lid to appliance.
The juice
extractor
has stopped
producing juice
The anti-drip spout
may be closed.
Check to see if the spout is
closed or open.
The integrated pulp
container or the
stainless steel filter
may be blocked.
Turn appliance off and unplug.
Disassemble the juicer, wash
all parts thoroughly and re-
assemble.
The juice
extractor is not
producing as
much juice as
expected
High fiber fruits and
vegetables may be
clogging the stainless
steel filter.
Turn off and unplug the
juicer. Disassemble, wash all
parts and re-assemble.
Appliance stops
running
Motor may be
overheating.
Unplug appliance and let it cool
for approximately 5 minutes
before continuing use.
Juicing time exceeds
2.5 minutes.
Unplug the juicer and remove
the juicer cup.
Re-assemble. Plug in juicer.
Cup leaks
or becomes
unscrewed
from base
Blade not screwed on
cup tight enough.
Unplug the juicer, turn the blade
base counterclockwise to tighten.
Turn the cup and blade assembly
counterclockwise to remove from
motor base and lift up.
Juicer does not
activate
Blade is not twisted
into the motor base
Remove the blade from the
cup and re-install.
Ensure the cup and blade
assembly are properly
twisted into the base.
Summary of Contents for JE9000BD
Page 1: ...Model Modelo JE9000BD 2 EN 1 EXTRACTOR DE JUGOS Y LICUADORA...
Page 29: ...29 NOTES NOTAS...
Page 30: ...30 NOTES NOTAS...
Page 31: ...31 NOTES NOTAS...
