Black+Decker GM1800, Original Instructions Manual

Page: 5 / 34

(Original instructions)
ENGLISH
5
• Place the appliance on a stable, heat-
resistant surface in a well-lit, ventilated
area.
• Do not use this appliance out of doors.
• Allow the appliance to cool before
storing.
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating
plate.
This product must be earthed.
Always check that the mains
voltage corresponds to the
voltage on the rating plate.
• Appliance plugs must match the outlet.
Never modify the plug in any way.
• Do not use any adapter plugs
with earthed (Class 1) appliances.
Unmodified plugs and matching outlets
will reduce the risk of electric shock.
• This product is not intended to be
operated by means of an external timer
or separate remote-control system.
• To avoid the risk of electric shock, do
not immerse the cord, plug or appliance
in water or other liquid.
Extension cables & class 1 product
• A 3 core cable must be used as
your tool is earthed and of class 1
construction.
• Up to 30m (100 ft) can be used without
loss of power.
• If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Markings onAppliance
The following pictograms along with the
date code are shown on the appliance:
Warning!
Hot surface.
Features
1. Interchangeable non-stick grill plates
2. Temperature adjusting knob
3. Power on light
4. Opening handle
5. Temperature light
6. Dripper nozzle
Use
Warning!
Let the appliance work at its own
pace. Do not overload.
Note: When using the appliance for the
first time, wash the two grill plates (1) with
warm water and mild detergent and oil
them with a small amount of vegetable oil.
Warning! While using for the first time, a
very small amount of smoke may be visible;
this is just caused by the warming up of
some components.
• Place the appliance on a flat surface.
Note: Make sure the plate is closed during
pre-heating phase.
• Before use, mount the grill plates (1):
• Insert the plates in the bottom and top
part of the grill by aligning the rear slots
with the hooks on the appliance body,