Black+Decker ET125-B5, Original Instructions Manual

Page: 4 / 20

After use
• Switch off and remove the plug from the socket before
leaving the appliance unattended and before changing,
cleaning or inspecting any parts of the appliance.
• When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Inspection and repairs
• Before use, check the appliance for damaged or
defective parts. Check for breakage of parts, damage to
switches and any other conditions that may affect its
operation.
• Do not use the appliance if any part is damaged or
defective.
• Have any damaged or defective parts repaired or
replaced by an authorised repair agent.
• Before use, check the power supply cord for signs of
damage, ageing and wear.
• Do not use the appliance if the power supply cord or
mains plug is damaged or defective.
• If the power-supply cord or mains plug is damaged or
defective it must be repaired by the manufacturer or its
service agent or a similarly qualified person in order to
avoid a hazard. Do not cut the power supply cord and do
not attempt to repair it yourself.
• Never attempt to remove or replace any parts other than
those specified in this manual.
• Do not attempt to repair the appliance. Take it to your
nearest Black+Deckerowned or authorised Service
Centre for repair.
Features
1. Bread slot
2. Carriage handle
3. Defrost button
4. Reheat button
5. Cancel button
6. Browning control
7. Housing
8. Removable crumb tray
Extension cables & class 1 product
A 3 core cable must be used as your appliance is earthed
and of class 1 construction.
For the first use
As there is manufacturing residue or oil remained in the
toaster or heat element, it usually emits the odor for the first
use. It is normal and will not occur after several uses. Before
toasting the first slice of bread it is strongly suggested to
operate the appliance following below instructions, except
without bread.
Operation:
1. Put bread slice into the bread slot, it can be inserted two
slices at most every time.
Note:
1. Make sure the crumb tray is completely positioned in
place before using.
2. Plug the power cord into the outlet.
3. Set browning control knob to your desired color. There is
6-position level, the lowest is white and the highest is
dark. The bread slice can be toasted to golden color at
the position of “4”.
Note:
1. Toasting color for one slice is darker than that for double
bread at the same level.
2. If toasted continuously, toasting color for the latter bread is
darker than the color of previous cycle at the same level.
3. Press carriage handle down vertically until it is positioned
in place, the indicator of Cancel will be illuminated, and
toasting begins. Once the bread has been toasted to the
preset color, the carriage handle will be automatically
pop up.
Note: The carriage handle can only be latched when the
appliance connects to the power supply.
4. During the toasted process, you may observe the
toasting color. If it is satisfactory, you may interrupt the
toasting process by pressing the Cancel button at
any time.
5. If the bread has been taken out from refrigerator. Set
color control knob to your desired color. Press carriage
handle down vertically until it is positioned in place, then
press Defrost button and the indicator of Defrost will be
illuminated. In this mode it will be toasted to your
desired color.
6. If you want to reheat the cold toasted bread. Press
carriage handle down vertically until it is positioned in
place, then press Reheat button and the indicator of
4
ENGLISH (Original instructions)