Black+Decker DCT10-B5, Original Instructions Manual, Page: 4 / 20

4
ENGLISH (Original instructions)
Labels on appliance
The following pictogram is shown on the appliance:
Warning! Hot surface.
Features
1. Top cover
2. Hot water outlet
3. Filter
4. Funnel
5. Water tank
6. Sipping attachment
7. Travel mug
8. Drip tray
9. Main housing
10. Power switch
Extension cables & class 1 product
• A 3 core cable must be used as your appliance is
earthed and of class 1 construction.
• Up to 30m (100 ft) can be used without loss of power.
• If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black+Decker Service
Centre in order to avoid a hazard.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal of the new
plug.
• Connect the blue lead to the neutral terminal.
• If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Note : If your product is class II double insulated (only 2
wires in the cord set), no connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality
plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Warning ! The above section on mains plug replacement is
for authorized service centre personals.
Labels on appliance
The following pictogram is shown on the appliance:
Warning! Hot surface.
Features
1. Top cover
2. Hot water outlet
3. Filter
4. Funnel
5. Water tank
6. Sipping attachment
7. Travel mug
8. Drip tray
9. Main housing
10. Power switch
Extension cables & class 1 product
• A 3 core cable must be used as your appliance is
earthed and of class 1 construction.
• Up to 30m (100 ft) can be used without loss of power.
• If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black+Decker Service
Centre in order to avoid a hazard.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal of the new
plug.
• Connect the blue lead to the neutral terminal.
• If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Note : If your product is class II double insulated (only 2
wires in the cord set), no connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality
plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Warning ! The above section on mains plug replacement is
for authorized service centre personals.
Additional safety instructions for coffee
makers
Warning ! The lid may become hot during use.
Warning ! Steam may escape from the unit.
• Allow the appliance to cool before fitting or removing any
parts and before cleaning.
• Do not immerse the appliance in liquid.
Use
Warning ! Never use the appliance without water in the
reservoir.
Before first use
• Unpack the coffee maker and remove all packaging,
promotional materials and stickers. Remove all printed
documents.
• Check that your maints supply is the same as the one
indicated on the appliance.
• Position the appliance on a flat, stable work surface,
away from the edge and other electrical appliances.
Ensure that the coffee maker is not positioned under any
cupboards or near any furnishings, wallpaper or similar
that could be damaged by hot steam.
• Wash all removable parts of the appliance in warm,
soapy water. Rinse and dry thoroughly with a soft cloth.
Do not use harsh/abrasive cleaners or place any part of
the appliance in the dishwasher.
Warning ! Never immerse the main body of the appliance,
cord set or plug in water or any other liquid.
• We recommend that you first familiarise yourself with all
parts of the appliance before using it for the first time. Do
not fill with water or connect to the mains supply when
doing this.
• To remove any remaining residue from the manufacturing
process, we recommend operating the coffee maker as
described in the ‘ Use ’ section. This will flush the
appliance out. Use water only, do not add coffee.
Note ! Ensure that the coffee maker mains cord does not
overhang the edge of the worktop.
Note ! When the coffee maker is plugged in and operated for
the first time, there may be a small amount of smoke and/or
odour as the heating elements warm up. This represents no
danger or malfunction with the product and should clear after
a couple of uses.
Using your coffee maker
1. Open the lid and fill the water tank with cold drinking
water
NOTE : Do not fill over the max level on the water tank.