![background image](http://html.mh-extra.com/html/black-decker-1/cs1004/cs1004_manual_2766062010.webp)
10 • ENGLISH
as shown in
(Fig. K)
.
MAINTENANCE
WARNING:
Unplug tool before installing or removing
accessories, before adjusting, or when making repairs.
Use only mild soap and damp cloth to clean the tool. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
Important!
To assure product
SAFETY
and
RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
LUBRICATION
BLACK+DECKER tools are properly lubricated at the
factory and are ready for use.
ACCESORIOS
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
WARNING:
The use of any accessory not
recommended for use with this tool could be hazardous.
Use only 185mm blades with 20mm diameter arbor.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement,
or if it is of no further use to you, do not dispose
of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Unit will not start
Cord not plugged in
Plug tool into a working outlet
Circuit fuse is blown
Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to
blow, discontinue use immediately and
have it serviced at a BLACK+DECKER
service center or authorized servicer)
Circuit breaker is tripped
Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to
trip, discontinue use immediately and
have it serviced at a BLACK+DECKER
service center or authorized servicer)
Cord or switch is damaged
Have cord or switch replaced at
BLACK+DECKER Service Center
or Authorized Servicer.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned
and authorized service locations throughtout Asia. All
Black & Decker Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
product service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the Black & Decker
location nearest to you.
NOTE
f
Black & Decker’s policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f
Standard equipment and accessories may vary by
country.
f
Product specifications may differ by country.
f
Complete product range may not be available in all
countries. Contact your local Black & Decker dealers
for range availability.