Page 9
TROUBLESHOOTING & WARRANTY
SPECIFICATIONS
•
Voltage: 120V, 60Hz
•
Unit Dimensions (W x D x H): 9.33 x 5.55 x 10.87
•
Net Weight: Approx. 1.98 lbs
TROUBLE
POSSIBLE CAUSE
POSSIBLE REMEDY
Appliance does not
turn on
Appliance is not plugged in
Check that the appliance is plugged into a
working outlet
Power on light is on but no
mist is being produced
No water is in water tank
Fill the water tank with water
Power on light is on but
humidifier is not operating
Too much water is in water tank
Remove water from the water tank
The mist has an odor
The unit is new
Remove water tank and open cover. Let it
sit in cool environment for 12 hours
The water may not be clean or
has become stagnant from sitting
too long
Clean the water tank/transducer and fill
with clean water.
*Refer to
CLEANING AND MAINTENANCE
section of this manual.
The volume of mist is low
There is mineral scale in the water
Clean the water tank/transducer and fill
with clean water
*Refer to
CLEANING AND MAINTENANCE
section of this manual.
The water may not be clean or
has become stagnant from sitting
too long
Clean the water tank/transducer and fill
with clean water
*Refer to
CLEANING AND MAINTENANCE
section of this manual.
Humidifier is noisy
There is a vibrating sound coming
from the water tank because the
water level is too low
Fill the water tank with more water
The humidifier is not on a flat
surface
Move the humidifier to a stable flat surface
Humidifier produces white
dust
Hard Water/Minerals in the water
Some white dust is normal. It is caused
by the mineral content in the water which
creates white dust when released into
the air. To reduce white dust you can use
distilled water.
Film or scale in water tank
Hard Water/Minerals in the water
Clean the water tank/tranducer and fill
with clean water
*Refer to
CLEANING AND MAINTENANCE
section of this manual.
Troubleshoot your problem by using the chart below. If the dehumidifier still does
not work properly, contact BLACK+DECKER customer service center or the nearest
authorized service center.
WARNING
:
Users must never troubleshoot internal components.
