Page 8
CLEANING AND MAINTENANCE
WARNING
: Be sure to unplug from the electrical supply source before cleaning.
Do not submerge humidfier base in water.
Do not attempt to disassemble the humidifier base for cleaning.
•
Clean the transducer, water tank and interior of the base every week.
•
Film or scale may for on the transducer or the interior of the base. To clean the
transducer, soak with undiluted vinegar for approximately 20 minutes. Gently
wipe with a soft cloth. Rinse with warm clean water.
•
Plastic parts of the humidifier should be cleaned with mild soap and a damp
cloth or sponge. Rinse with clean water to remove any soapy film residue.
•
Remove the cover of the dust vent and occasionally rinse with cool, soapy water
to rinse off dust particles. Allow the filter to air dry. Once it is completely dry,
reinsert it and replace the dust vent cover.
STORAGE
If you are not going to use the humidifier for a long time make sure all water is
removed and the humidifier is clean and dry. Store in a cool dry place.
SET UP & USE
