22
ENGLISH
the weight of the product. The product may fall and be
damaged.
Use the Magnet
• This product comes with a magnet
5
at the bottom of
the main unit and can be used by fixing it to a surface
made of a material such as iron. When fixing with the
magnet, be sure that the hanging hook is stored.
MAINTENANCE
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning. Your charger does not
require any maintenance apart from regular cleaning.
WARNING: To reduce the risk of serious personal
injury, turn off the tool and disconnect it from
the power source before making adjustments or
removing / installing devices or accessories
. An
accidental start could cause injuries.
¡Important!
To ensure product
SAFETY
and
RELIABILITY
, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified organizations, always using identical
replacement parts. Unit contains no user service able
parts inside.
CLEANING
WARNING:
Never use solvents or other abrasive
chemicals to clean non-metallic parts of the tool. These
chemicals can weaken the plastic materials used in these
parts. Use a cloth dampened only with water and neutral
soap. Never allow liquid to penetrate inside the tool or
immerse any of the parts in a liquid.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste. Should
you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make
this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the retailer when
you purchase a new product.
BATTERIES
BLACK+DECKER batteries can be recharged many
times. At the end of their useful life, discard
batteries with due care for our environment:
• Run the battery down completely, then remove it from
the tool.
• NiCd, NiMH and Li-Ion batteries are recyclable. Take
them to any authorized repair agent or a local recycling
station.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest you, or visit us at
www.blackanddecker-la.com
TECHNICAL DATA
LED FLASHLIGHT
BFL420
36 Lateral
white LEDS
Lumen
300
18 Lateral
red LEDS
Flashing
1 Top LED
Lumen
(W)
120 (3)
Weight
lbs (kg)
0.77 (0.35)
CHARGER
Charging cable connection
USB
Input voltage
5 V
Charge time
hr
4 - 6
BATTERY
Voltage
3.7 V
Capacity
Ah
2.0
Type of battery
Lithium Ion Integrated
Summary of Contents for BFL420
Page 23: ......
