Black+Decker BDROUT127, Manual

Page: 16 / 32

16
ENGLISH
(Original instructions)
f. Dress properly. Do not wear loose
clothing or jewellery. Keep your hair and
clothing away from moving parts.
Loose clothes, jewellery or long hair can
be caught in moving parts.
g. If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
h. Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles.
A careless action can
cause severe injury within a fraction of a
second.
4. Power tool use and care
a. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b. Do not use the power tool if the switch
does not turn it on and off.
Any power
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
c. Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool
before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use . Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g. Use the power tool, accessories and tool
bits etc., in accordance with these
instructions, taking into account the
working conditions and the work to be
performed .
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
h. Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery handles and grasping surfaces
do not allow for safe handling and control
of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Additional power tool safety
warnings
Warning! Additional safety warnings
for routers
• Hold the power tool by the insulated
gripping surfaces only, because the
cutter may contact its own cord. Cutting
a "live" wire may make exposed metal
parts of the power tool "live" and could
give the operator an electric shock.
• Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by
hand or against the body leaves it
unstable and may lead to loss of control.
Warning!
Contact with, or inhalation of dusts
arising from routing applications may
endanger the health of the operator and
possible bystanders. Wear a dust mask
specifically designed for protection against
dust and fumes and ensure that persons
within or entering the work area are also
protected.
• Thoroughly remove all dust after routing.
• Only use router bits with a shank
diameter equal to the size of the collet
installed in the tool.
• Only use router bits suitable for the
no-load speed of the tool.