3.6.2.18
sys_addusr
Format:
sys_addusr name password
Parameter:
name = user name, 15 characters max.
password = passwort, 15 characters max.
Adds a new user to user management. After successfull command execution (no message) the new user can
connect to the unit using the new name and password.
If entered name or password do not fullfill length and format reqirements, an error message is displayed.
Remark: Do use ASCII characters only and avoid any special characters in name and password. This makes
your login compatible with any terminal or Telnet application software.
3.6.2.19
sys_delusr
Format:
sys_delusr name
Parameter:
name = (user-)name of an user existing.
Discards the user ‘name’ from system’s user management. If user is connected to the unit while deleting it’s
record, existing connections won’t break, but the user can not open any new connections.
If user ‚name’ is unknown to the unit, an error message will appear.
Remark: Do no delete you own actual user from user management, because you won’t be able to connect
to the unit again!
3.6.2.20
sys_fan
Format 1:
sys_fan
Displays the current status of the system’s fan.
Under normal operating conditions, the fan is off. It will be turned on automatically when system’s tem-
perature requires cooling.
Please read table 3 for interpretation of fan speed result.
fan speed
rotation
0
off
1
25%
2
50%
3
75%
4
100%
Table 3: fan speed index
Format 2:
sys_fan N
Parameter:
N = [0..4] like in table 3.
Sets the system’s minimum fan speed. If unit requires higher fan speed for keeping it’s internal tempera-
ture in valid ranges, it rises actual fans speed.
