
10
KVM SWITCH
3.2.3 C
ONNECTING THE
M
ONITOR
, K
EYBOARD
,
AND
M
OUSE
A Monitor/Keyboard/Mouse (MKM) Adapter Cable connects your monitor,
keyboard, and mouse to the KVM Switch. Because various styles of electrical
connectors are used by different classes of equipment, Black Box carries this
adapter cable in various styles to match.
1. Plug the DB25 male connector of the MKM Adapter Cable into the port
labeled “COMMON” on the KVM Switch’s rear panel.
2. Plug the cables from your shared monitor and keyboard into the
corresponding connectors at the other end[s] of the MKM Adapter
Cable.
PC models (SW730A, SW731A) only:
a. To use a PS/2 keyboard, you will need to attach a special keyboard
adapter (6-pin mini-DIN female to 5-pin DIN male, our product
code FA212) between the keyboard cable’s connector and the
MKM Adapter Cable’s connector.
b. The Switch is transparent to the shared keyboard’s scan mode, but
all of the connected CPUs must be able to support the scan mode
of the shared keyboard.
c. Plug the cable from your shared mouse into the corresponding
connector of the MKM Adapter Cable. The mouse
must
be an
RS-232 serial mouse; the KVM Switch does not support standard
PS/2 bus mice.