9
DISPLAY TOPOLOGY CONFIGURATION
The KM has a configurable display topology configuration that can be easily activated through key-board hotkeys.
No software or drivers are required to configure the display topology.
Note: Hotkey CTRL+CTRL command allows for multiple rows.
(1)
Hotkey Command: “CTRL + CTRL + H + 4 + ENTER”
(2) Hotkey Command: “CTRL + CTRL + H + 2 + ENTER”
(3) Hotkey Command: “CTRL + CTRL + H + 3 + ENTER”
(4) Hotkey Command: “CTRL + CTRL + H + 1 + ENTER”
LIMIT INPUT PORTS CONFIGURATION
Hotkey Commands: CTRL, CTRL W(X) commands (allows one row only): W4<CR>
W3
<CR>
Note: Port 4 N/A
W2
<CR>
Note: Ports 3, 4 N/A
W1
<CR>
1
2
3
4
1
2
3
4
1
2
3
1
2
3
4
Each of the cells shown represents a display or
multiple displays from a com-puter.
Notes:
Cursor control of selected channels can only be used in
Single-Head display mode.
- Multi-Head display mode switching must be used if
any of the four com-puters have multiple displays.
1
2
3
4
1
2
3
1
2
1
Note: Port 2-4 N/A
Note:
Limit Input Ports commands reset Display Topology configuration
1.877.877.2269
BLACKBOX.COM
USER GUIDE
