15
CHAPTER 2: Introduction
2.3 The ServSwitch Wizard MP Illustrated
Figure 2-1. The ServSwitch Wizard MP’s front panel.
Fig. 2-2. The ServSwitch Wizard MP’s rear panel.
Figure 2-3. The Remote-Control Module (KV6REM), an optional accessory.
The bottom panel of the ServSwitch Wizard MP isn’t shown here, but there’s a
small hole for a recessed switch on it. You’ll use this switch—which can be activated
with the tip of a pen, a paperclip, etc.—if you ever do a “warm reset” of the Wizard
MP (see
Section 5.11
) or upgrade the Wizard MP’s firmware (see
Section 5.12
).
Display shows
status and
mouse/keyboard
data activity
Display shows status and
mouse/keyboard data activity
Button for
changing
channels and
entering
configuration
mode
Button for
changing
channels and
entering
configuration
mode
Control-port monitor
connector
Control
port
Connector
for
optional
power
supply
Control-port PS/2
mouse (left) and
keyboard (right)
connectors
Control-port microphone
(left) and headphone/
speaker (right) connectors
Control-port Sun
keyboard/mouse connector
Expansion port for
Remote-Control Module
and firmware upgrades
CPU ports
1 through 4
