SERVSWITCH™ OCTOPUS INSTALLER/USER GUIDE
28
Maintain
Use Maintain mode when you wish to remain connected to a server while rebooting.
Once a server is selected in Maintain mode, it will not lose contact with the switch
when power is cycled.
NOTE:
Servers in Maintain mode cannot be shared.
User
The User tab provides the current user with options to log out, change scan dwell
times or change the password. Passwords must be at least six characters long. For
more information on passwords and user options, see
User Maintenance
in
Chapter 5.
Console
The Console tab is used to set local settings for the Octopus user station including
country specific keyboard layout, command line hotkey sequence, On-Screen
Display (OSD) hotkey sequence and logout time.
Entering a logout time will configure your Octopus to automatically log a user out
after a specified amount of keyboard and mouse inactivity.
You may choose to select an alternative hotkey sequence by selecting one of the five
options listed in the pull-down menu. The available command line hotkey
sequences are:
Ctrl+Ctrl
Alt+Alt
Shift+Shift
Print Screen
All
For more information, see
Console Maintenance
in Chapter 5.
Admin
This menu tab is only available to the Admin user.
Users Admin
The Users Admin button allows the Administrator to add, edit and delete users, and
assign rights to each server. For more information about user administration, see
Chapter 5.
