29
CHAPTER 6: Installation
6.2.5 A
TTACHING A
S
ERV
S
WITCH
M
ULTI TO THE
E
XTENDER
To attach a User Card installed in a ServSwitch Multi to the CPU port of an
Extender’s Local Unit, first plug the extension cabling included with the Extender
into the matching connectors of the Local Unit’s user port. Then plug a
ServSwitch Multi User Cable such as product code KV2515 into the Multi’s User
Card. Connect the matching ends of the extension cabling and User Cable
together as shown in Figure 6-4.
Figure 6-4. Attaching a ServSwitch Multi to the CPU port of a
Single-Access Local Unit.
To attach a CPU Card installed in a ServSwitch Multi to the user port of a Dual-
Access Extender’s Local Unit, which doesn’t have serial or audio ports, run a
regular ServSwitch Multi CPU Cable such as product code KV2020-R2 from the
CPU Card to the appropriate connectors on the Local Unit’s CPU port.
To attach a ServSwitch Multi CPU Card to the user port of an Extender’s Remote
Unit, run a ServSwitch Multi CPU Cable with Audio such as product code
KV2040-R2 from the CPU Card to the appropriate connectors on the Extender’s
Remote Unit, as shown in Figure 6-5.
Figure 6-5. Attaching a ServSwitch Multi to the Remote Unit’s user port.
ServSwitch Multi EXP
(KV160A-R2)
User Card
(KV2550C-R3)
ServSwitch Multi EXP
(KV160A-R2)
ServSwitch
Multi User
Cable
(KV2515)
ServSwitch Multi CPU Cable
(KV2040-R2)
Included keyboard-,
mouse-, and video-
extension cables
Included serial- and
audio-extension
cables
CPU Card
(KV2000C)
