MAX SECURE CO-LOCATION CABINET AND ACCESSORIES
11
To remove a clip nut from a rail, insert a flat-blade screwdriver or knife under the tab on the front and pry up,
freeing the retaining ring from the rail.
1. Select the location at which the fan panel will be installed in the Cabinet.
2. Snap one clip nut into the top hole at the selected position and then install another one four holes down.
See the figure below.
3. Measure from the bottom of the vertical rail to the top clip nut. Assemble clip nuts onto the opposite rail at
the measured height.
4. Assemble the fan panel to the rails with the #10-32 x
1
⁄
2
" Phillips-head screws provided. See the figure below.
Rail
Rail
Cord
#10-32 x
1
⁄
2
"
Phillips head
screws
Clip nut
Clip nut
0.5"
0.5"
0.5"
0.5"
0.625"
0.625"
0.625"
0.625"
0.625"
Rail
Use this hole
Use this hole
Summary of Contents for RM571
Page 3: ......
