1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746
© Copyright 2008. Black Box Corporation. All rights reserved.
TRADEMARKS USED IN THIS MANUAL
BLACK BOX and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Assembly
1. Lay both rails on the floor with the open ends facing each other.
2. Align the two holes on one of the bases to the side of both rails. Secure the base in place with four hex
bolts (2 on each side).
3. Align the single hole on one of the rails with one of the top angles. Secure the top angle with two hex bolts
(one on each side).
4. Turn the assembly over and repeat steps 1–3.
5. Use the 20 12-24 mounting screws to attach equipment to the rack.
