21
21
CHAPTER 6: Control the power outlets
Use the following command: Px=y
Where x = power outlet number (0 to 4)
0 = all power outlets together
1 = power outlet 1
2 = power outlet 2
3 = power outlet 3
4 = power outlet 4
Where y = command
0 = switch corresponding power outlet(s) to Off
1 = switch corresponding power outlet(s) to On
r = restart corresponding power outlet(s)
t = toggle corresponding power outlet(s)
Examples:
Switch power outlet 1 ON: p1=1
Switch power outlet 2 OFF: p2=0
Restart power outlet 1:
p1=r
Restart power outlet 4:
p4=r
Toggle power outlet 3:
p3=t
Switch all power outlets ON: p0=1
Restart all power outlets:
p0=r
The Power Switch accepts lower case and upper case commands.
The version of the firmware can be displayed by typing "?" followed
by <
ENTER
>.
