5
CHAPTER 3: Installation
C. If the serial port you need to connect is not an RJ-45 female, you will
also need
one modular adapter
.
For
parallel-to-serial
conversion: To connect RJ-45 UTP to a printer’s
serial port, use an RJ-45-female-to-DB25-male adapter pinned as in
Figure 3-1. Our product code for this adapter is FA080-R2. Refer to
Figure 3-3 for a typical system setup using this adapter.
For
serial-to-parallel
conversion: To connect RJ-45 UTP to an IBM
PC/XT™ type computer’s serial port, use an RJ-45-female-to-DB25-female
adapter pinned as in Figure 3-1. Our product code for this adapter is
FA081-R2. To connect RJ-45 UTP to an IBM AT
®
type computer’s serial
port, use an RJ-45-female-to-DB9-female adapter pinned as in Figure 3-2.
Our product code for this adapter is FA082-R2. Refer to Figure 3-3 for
typical system setups using these adapters.
Pinning
DB9
to
RJ-45
1, 6, 8 ------------------------------------------------------- 3
2 -------------------------------------------------------------- 6
3 -------------------------------------------------------------- 5
4 -------------------------------------------------------------- 7
5 -------------------------------------------------------------- 4
(For more detail, see the Appendix)
FA082-R2
Figure 3-2. DB9 Female Adapter and Required Pinning.
Summary of Contents for PI035A
Page 26: ...NOTES...
