27
MINIATURE 2-CHANNEL STATISTICAL MULTIPLEXOR
Table 4-5. System Configuration Parameters.
Code
Item
Description
1
X-ON CONTROL CHARACTER
Used to display X-ON
character selection screen
2
X-OFF CONTROL CHARACTER
Used to display X-OFF
character selection screen
3
MODIFY PASSWORD
Used to display password-
changing screen
4
REMOTE MUX CONFIGURATION Used to display the main
menu used for remote
Multiplexor configuration
Q
EXIT
Used to return to the main
menu.
To select a configuration task, type the corresponding code number: the
Multiplexor will switch to the corresponding screen.
Type Q to return to the main menu.
4.11 X-ON Control Character Screen
View the character currently used to start data transfer when using software flow
control, and select if desired, another character.
Code numbers 1) through 8) present the various characters that can be used as
X-ON control characters: 11 (DC 1),12H (DC2),13H (DC3),14H(DC4), 91H, 92H,
93H or 94H.
The CURRENT STATE line shows the X-ON character now in use.
To change the current selection, type the code number corresponding to the
desired character: always check that this character is different from the current
X-OFF control character. The CURRENT STATE line reflects the change.
To exit with or without change, type Q. You will return to the SYSTEM
CONFIGURATION menu.
