79
MINIMODEM USB
2. In the terminal window, type
AT#SMTSMODEM
(or
AT#Syyyyyy
if you have replaced the
MTSMODEM password with yyyyyy) and press
ENTER. The modem responds with OK if the
ERROR
if it is wrong.
3. To change the password, type
AT#S=yyyyyy
, where
yyyyyy stands for the password, and press ENTER.
The password can include any keyboard character,
and must be one to eight characters long. The
modem responds with
OK
.
4. The new password is saved automatically. You can
now either enter more AT commands or exit the
data communications program. The next time you
remotely configure the modem you must use the
new setup password.
NOTE
You can only change the setup password locally; you
cannot do it remotely. Also, passwords are case-
sensitive. The next time you enter the password, it must
be in the same case as you set it up.
6.3.2 C
HANGING THE
R
EMOTE
E
SCAPE
C
HARACTER
To increase security, you can change a remote modem’s
remote-configuration escape character. The factory
