Manual of VDSL2 Solution
http://www.black-box.eu
_____________________________________________________________________________
CONFIGURING BY RS232
MEG201AE features a Serial RS232 Port. Use a straight through (1:1) cable to configure
the MEG201AE using Hyperterminal or any VT100 application of your choice.
You need to setup a bitrate of
115200bps
with
8N1
without any handshaking.
If the MEG201AE has been powered up already you will see a prompt by hitting the
ENTER key:
/ #
If you have not powered up MEG201AE, please do so and wait until the boot process is
finished. The boot process finishes with the following (for the Transmitter, the Receiver
looks very similar):
MEG201AE VDSL Transmitter
Image V 2.0.12 (CO)
FW: v9.7.3.11.0.2
DSL-API: v2.0.12
DFE-Drv: v0.1.4.8
WEB-Interface: vD.2x
--------------------------------------------------------------
--------------------------------------------------------------
Addr: 1200007c, value: bfffffff
BusyBox v1.00 (2006.05.29-14:43+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ #
As you may identify from the commands above MEG201AE is a Linux based device.
Many of the common Linux commands can be used here. However, please consider that
you purchased a VDSL2 modem device, not a PC. And always keep in mind that Black
Box gives you support for configuring a standard VDSL2 modem. If you try to use the
MEG201AE as a Linux hardware platform and modify its internal software structure
there is no support or warranty on the unit.
